Loading...
Answers
MenuHow to raise money for a hardware startup that needs money upfront to even produce a prototype?
Answers
Have you considered crowdfunding?
Investment grants will be able to take care of funding but crowdfunding has the benefit of taking care of funding and providing a customer base.There are many examples of teams without a fully working prototype being successful on these platforms.
Kickstarter will be off the table but you have some great options with Indiegogo (https://www.indiegogo.com/) and the Brazil specific network Catarse (http://catarse.me/en)
Of course, you will have to focus on things like presenting your story and getting attention for a bit but if you are successful you will have money for a prototype, access to a customer base and exposure that could bring some helpful people onto your team - even the angels and VCs you'll need to get to the next level.
Message me if you need some help - I'm not personally an expert in crowdfunding but I can connect you with some of the best in the business.
HI...
In your case, banks may be a difficult option. May be in the future you start thinking of banks to redesign the company equity / debt leverage ratios. But not now...
To raise the fund you have some few options..
Venture capitals / private equity is your main target of course. Those who want a customer base will be avoided.
Having it really dififcult to convince these people is something normal, but also, consider you may be doing something wrong, or incomplete. Regarding the feasibility study or the business model. You need to review that..
Why can't you have a proof of concept ? or a prototype ? How much do you need ? How much would it cost ?
what about the tech labs in the university ? The schools of engineering may have some fund. Actually lots do to fund research and small projects. You may also find some other students that can help you build it for a share ..
Go to one of the factories, but make sure you speak directly to one of the board members , CEO , head of engineering or research.. Lots of companies support intrepreneurship. They can then hire you and fund your project as a subsidiary of their company.. That's another option.
Some famous funding alternatives can be intel capital (http://www.intelcapital.com ) , or Bill and Melinda Gates Foundation ( http://www.gatesfoundation.org ) . You may be able to have a grant from this foundation if you have a cause, like the water issue you mentioned. (still your idea is not clear to me )
If you go to angel investors, or some platform like angel.co , you can post a job asking for a partner to raise money for the project.
I will also not mind sending proposals to big banks outside your country. If the project is profitable they will fund it.
and ...
It is always tough in the beginning. Never loose the spirit.
Good Luck!
Here is a list of places you should check to see if you can crowdsource you idea in Brazil:
https://beta.catarse.me/en/projects
http://www.ulule.com
http://ideias.me
Can't tell you if they would take hardware but you should also look into the brazilians accelerators http://startupbrasil.org.br/landing/guide-of-accelerators-startupbrasil.pdf
Hope this can help you get started
See if there is a way to make a prototype even if it is wood and wires. Arduino boards are relatively inexpensive.
& Take a look at: http://highway1.io/
Well, for reassurance, this is a problem for almost every hardware-focused startup unless you are an entrepreneur with a successful track record. You need funding to build a prototype, but those providing the funding want to see a prototype first. The key is to focus on funding options that are appropriate for your current stage of development. I'm not familiar with the startup ecosystem in Brazil, but here are my thoughts:
1. Banks - no need to approach a bank or any typical lending institution. They will require collateral and some revenue history or payables.
2. VCs - you're too early for VCs. They typically want revenue being generated or potential customers lined up and usually aren't the first ones to invest (unless you've been successful with them in the past).
3. Angels - many angels are now requiring a prototype or customers lined up. An introduction to an angel investor may get them interested, but it sounds like you've already exhausted this option.
4. Friends and family - depending on how much you need, you could raise the funds through those you know. This highly depends on the relationship as they can lose all their money.
5. Vendor financing - you may be able to have a contractor build a prototype for you with no upfront cost but with an agreement for future compensation such as revenue sharing or equity.
6. Government funding - considering you are addressing a federal and state problem, maybe there are government funding options such as grants.
7. Crowdfunding -you may be able to crowdfund your prototype development. It's worth looking into, just make sure you become aware of the strings attached regarding crowdfunding including any regulations in Brazil.
8. Bootstrap - you may be stuck bootstrapping, which is really the best way to go in the early stages if at all possible. With electronics such as Raspberry Pi and Arduino and numerous 3D printing options, you may be able to build a minimal prototype on your own just to prove your concept and have something to show people.
Feel free to get in touch if you need more guidance on early-stage funding.
Good luck!
Gareth.
Related Questions
-
How do startups figure out their pre-money valuation when when talking to investors before their company is making any money?
I'm both an active angel investor and entrepreneur who has recently raised capital. I'll start with what is standard in Silicon Valley and then apply various multiples and discounts where relevant. For an angel or early seed round, the current going rate is $3m-$5m pre-money via a capped note or priced round. Priced Rounds typically most often use the "Series Seed" docs and Convertible Notes typically are 18-24 month terms with a 15% discount. I don't mean to be argumentative but Marco is incorrect that valuation can be avoided by a capped note. And in general, there is no way to avoid setting a valuation except via an uncapped note, which is almost unheard of. Setting your cap and discount will have a significant impact on your cap structure, the same (and in some cases) worse than a priced round. This $3m - $5m range is what I'd call current market value in the valley for "ideation-stage" capital. This is that there is a team in place, typically some form of MVP and in some cases some very basic market data supporting the general thesis of the raise. In the other market I'm familiar with (Canada), the range for the same stage of capital is $1m - $3 with most being in between $1m and $2m and most preferring priced rounds over notes. These rounds rarely have a real lead since the raise is typically $500k or less, so if you price it reasonably, most (good) angels will accept the terms as is. The low and high end of the ranges are discounted and pushed by the credibility presented most often by the team (done it before, worked for a notable company, had some relevant success) or strong evidence of the thesis being correct. It's also the Founder's option to price the round at the top end of reasonable or provide what you might consider a discount, depending on the kind of investors you are courting. So while this is what I'm seeing as "current market conditions" there is price elasticity in any market. The best way you know if you've priced it right, is if people are buying. Any angel investor should be able to give you a conditional answer after the first meeting (subject to playing with the product, reading terms, meeting the rest of the team). Any angel investor in ideation stage capital who can't give you a yes, no or subject-to yes in the first meeting is not worth pursuing IMO. Any investor who can't close within 3 meetings or conversations won't close (9 times out of 10). Happy to talk to you about the specifics of where you're at, what might help you improve your odds and generally get you closer to the point where you're ready to raise.Tom WilliamsTW
-
When raising money how much of equity do you give up to keep control? Is it more important to control the board or majority of shares?
It entirely depends on the kind of business you have. If you have a tech startup for example, there are pretty reliable assumptions about each round of funding. And a business plan and financial forecasts are almost totally irrelevant to sophisticated tech investors in the early stages of a company's life. Recent financial history is important if the company is already generating revenue and in that case, a twelve-month projection is also meaningful, but pre-revenue, financial forecasts in tech startups mean nothing. You shouldn't give up more than 10-15% for your first $100,000 and from that point forward, you should budget between 10-20% dilution per each round of subsequent dilution. In a tech startup, you should be more nervous about dilution than control. The reality of it is that until at least a meaningful amount of traction is reached, no one is likely to care about taking control of the venture. If the founding team screws-up, it's likely that there will be very little energy from anyone else in trying to take-over and fix those problems. Kevin is correct in that the board is elected by shareholders but, a board exerts a lot of influence on a company as time goes-on. So board seats shouldn't be given lightly. A single bad or ineffective board member can wreak havoc on a company, especially in the early stages of a company's life. In companies outside of tech, you're likely going to be dealing with valuations that are far lower, thus likely to be impacted with greater dilution and also potentially far more restrictive and onerous investment terms. If your company is a tech company, I'm happy to talk to you about the financing process. I am a startup entrepreneur who has recently raised angel and VC capital and was also formerly a VC as part of a $500,000,000 investment fund investing in every stage of tech and education companies.Tom WilliamsTW
-
Pitch Decks: What do investors think of comedy in pitch decks?
Instead of calling it "comedy", aim for humor. Humor that supports a key discovery helps to anchor that insight in the investor's mind. I've coached many pitches, and find that when presenters are nervous they try to go for an improvised laugh, thinking it will cut the tension. However, in most situations, it comes off as just that: improvised and cheesy. Which confims to the audience that the presenter is nervous and unsure. Humor an advanced communication skill which requires strategy, planning and practice. The best humor is subtle and smart. The goal is not to get a laugh, but to get a knowing smile.Davender GuptaDG
-
What's the best visual format to display the size of the market when doing a pitch deck.
I like to take a rule from the Steve jobs playbook and use simple circles... one larger than the other but no more than 2. your most immediate target (realistic reachable) and one of the "enemy" competitor company. or overall untapped market cap. **for this to be effective you must provide as accurate projections as possible** no bar graphs and as little or no text as possible... remember that a deck is a companion to the speaker... avoid bullet points and use the deck to entertain rather than educate... is not a class is a pitch. :)Humberto Valle Texas Real Estate Investor, Wholesaler, & Airbnb SuperhostHV
-
When's the best time to raise capital for your startup?
The best time to raise capital for a startup is when you have a clear idea of what you want to do and a clear idea of how much money you need to get to a milestone that will set a higher value for your company. In general its better to bootstrap and do friends and family as long as you can, because the more mature and successful you are the better deal you will get from angels or VCs.Alexander CrutchfieldAC
the startups.com platform
Copyright © 2025 Startups.com. All rights reserved.